Cisco Systems 7401 Configure the Router, Perform a Basic Configuration Using the Setup Facility

Models: 7401

1 40
Download 40 pages 28.88 Kb
Page 26
Image 26

7Configure the Router

Perform a Basic Configuration Using the Setup Facility

If you do not plan to use AutoInstall, do not connect the router’s serial (WAN) cable to the channel service unit/data service unit (CSU/DSU). If the WAN cable is not connected, the router boots from Flash memory and goes automatically into the setup facility.

You can run the setup facility any time you are at the enable prompt (#) by entering the setup command.

If the serial (WAN) cable is connected to the CSU/DSU and the router does not have a configuration stored in NVRAM, the router attempts to run AutoInstall at startup. The router may take several minutes to determine that AutoInstall is not set up to a remote TCP/IP host. Once the router determines that AutoInstall is not configured, it defaults to the setup facility.

Configure Global Parameters

When you first start the setup program, you must configure the global parameters. These parameters are used for controlling system-wide settings. Complete the following steps to enter the global parameters:

Step 1 Connect a console terminal to the console port, and then boot the router.

The system boots from Flash memory. The following information appears after about 30 seconds. When you see this information, you have successfully booted your router:

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph

(c)of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph

(c)(1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) 7400 Software (C7400-JS-M) Version 12.2

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Fri 19-May-01 13:12 by Biff

Image text-base:0x60008960, data-base:0x617CA000

cisco 7401ASR (NSE) processor (revision A) with 245760K/16384K bytes of memory. Processor board ID 4294967295

R7000 CPU at 375Mhz, Implementation 39, Rev 3.3, 256KB L2, 2000KB L3 Cache 1 slot ASR midplane, Version 2.0

Last reset from power-on Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp). TN3270 Emulation software.

PXF processor tmc has been reset.

8 Ethernet/IEEE 802.3 interface(s)

2 Gigabit Ethernet/IEEE 802.3 interface(s)

509K bytes of non-volatile configuration memory.

64256K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes). 8192K bytes of Flash internal SIMM (Sector size 256K).

Press RETURN to get started!

26

Page 26
Image 26
Cisco Systems 7401 quick start Configure the Router, Perform a Basic Configuration Using the Setup Facility

7401 specifications

Cisco Systems 7401 is a robust router designed for numerous applications, particularly in service provider and enterprise environments. It stands out in the market due to its high capacity, innovative technology, and versatile features, making it an ideal choice for organizations looking for scalable and reliable network solutions.

At the core of the Cisco 7401 is its ability to handle high levels of data traffic efficiently. It supports advanced IP routing protocols, ensuring optimal routing decisions and improved network efficiency. The router is equipped with multi-service support, which allows it to simultaneously manage data, voice, and video traffic. This feature is essential for organizations aiming to unify their communications and enhance collaboration.

One of its notable technologies is the Cisco IOS (Internetwork Operating System), which powers the router with a comprehensive suite of network services. The IOS provides advanced security features, including firewalls and VPN support, protecting data integrity and ensuring secure connections across the network.

The 7401 also supports advanced Quality of Service (QoS) capabilities, enabling organizations to prioritize their network traffic effectively. This is particularly crucial for applications that require real-time data transmission, such as VoIP and video conferencing. By managing bandwidth allocation intelligently, the router ensures that critical applications receive the necessary resources to perform optimally while minimizing latency and disruptions.

In terms of performance, the Cisco 7401 is designed to support advanced network architectures, such as Software-Defined Networking (SDN) and Network Functions Virtualization (NFV). This adaptability allows organizations to implement flexible and dynamic networking models, facilitating rapid deployment of services and scalability as business needs evolve.

Moreover, the router boasts a modular design, allowing businesses to customize their configurations to fit specific needs. It supports various interface modules, providing a range of connectivity options, including Ethernet, Fiber, and MPLS. This flexibility ensures that organizations can expand their network capabilities without a complete hardware overhaul.

In summary, the Cisco Systems 7401 is a powerful, feature-rich router suitable for diverse applications within complex network environments. With its high capacity, support for advanced technologies, and security features, it remains a formidable option for organizations looking to enhance their network infrastructure and streamline their communications.