T1 channel service unit/data service unit (CSU/DSU) that converts the High-Level Data Link Control (HDLC) synchronous serial data stream into a T1 data stream with the correct framing and ones density to connect a serial port to a T1 network. (Some telephone systems require a minimum number of 1 bits per time unit in a data stream, called ones density.) Several T1 CSU/DSU devices are available as additional equipment, and most provide a V.35, EIA/TIA-449, or EIA-530 electrical interface.

Prepare for Workbench or Tabletop Installation

For a workbench or tabletop installation, verify the following before installing the router:

The router is off the floor and has adequate ventilation.

An adequate chassis ground (earth) connection exists for the router.

The router has at last 3 inches (7.62 cm) of clearance at the inlet and exhaust vents (sides of router).

The router has 19 inches (48.3 cm) clearance at the front and rear to allow for CompactFlash Disk, Gigabit Interface Converter (GBIC), and port adapter replacement or installation, or to access cables or equipment.

The port adapter filler panel is installed if a port adapter is not installed. The slot must not be empty.

For cable-management bracket installation instructions, see page 14.

Prepare for Rack-Mount Installation

Make these decisions before you begin the rack-mounting tasks:

Decide whether or not you want to front- or rear-mount the chassis.

Decide whether or not you want to attach the cable-management bracket.

Determine the type of rack—four-post or two-post—that you will be using.

Identify I/O Panel Ports

ENABLED RX

CELLS

CARRIERALARM

TX

 

RX

RX

RX

 

 

 

1

2

ENHANCEDATM

4 5

7 8 10 11

3

6

9 12

13

57606

1

Port adapter slot (installed port adapter shown)

8

Console port

 

 

 

 

2

Port adapter latch

9

Alarm port

 

 

 

 

3

GBIC port 0

10

Ground for ESD wrist strap with banana jack

 

 

 

 

4

FE port 0

11

Power switch

 

 

 

 

5

FE port 1

12

CompactFlash Disk slot

 

 

 

 

6

GBIC port 1

13

Power connector

 

 

 

 

7

Auxiliary port

 

 

 

 

 

 

5

Page 5
Image 5
Cisco Systems 7401 quick start Prepare for Workbench or Tabletop Installation, Prepare for Rack-Mount Installation

7401 specifications

Cisco Systems 7401 is a robust router designed for numerous applications, particularly in service provider and enterprise environments. It stands out in the market due to its high capacity, innovative technology, and versatile features, making it an ideal choice for organizations looking for scalable and reliable network solutions.

At the core of the Cisco 7401 is its ability to handle high levels of data traffic efficiently. It supports advanced IP routing protocols, ensuring optimal routing decisions and improved network efficiency. The router is equipped with multi-service support, which allows it to simultaneously manage data, voice, and video traffic. This feature is essential for organizations aiming to unify their communications and enhance collaboration.

One of its notable technologies is the Cisco IOS (Internetwork Operating System), which powers the router with a comprehensive suite of network services. The IOS provides advanced security features, including firewalls and VPN support, protecting data integrity and ensuring secure connections across the network.

The 7401 also supports advanced Quality of Service (QoS) capabilities, enabling organizations to prioritize their network traffic effectively. This is particularly crucial for applications that require real-time data transmission, such as VoIP and video conferencing. By managing bandwidth allocation intelligently, the router ensures that critical applications receive the necessary resources to perform optimally while minimizing latency and disruptions.

In terms of performance, the Cisco 7401 is designed to support advanced network architectures, such as Software-Defined Networking (SDN) and Network Functions Virtualization (NFV). This adaptability allows organizations to implement flexible and dynamic networking models, facilitating rapid deployment of services and scalability as business needs evolve.

Moreover, the router boasts a modular design, allowing businesses to customize their configurations to fit specific needs. It supports various interface modules, providing a range of connectivity options, including Ethernet, Fiber, and MPLS. This flexibility ensures that organizations can expand their network capabilities without a complete hardware overhaul.

In summary, the Cisco Systems 7401 is a powerful, feature-rich router suitable for diverse applications within complex network environments. With its high capacity, support for advanced technologies, and security features, it remains a formidable option for organizations looking to enhance their network infrastructure and streamline their communications.