Start and Configure the System

Start a Basic Configuration

18

Many privileged-level EXEC commands are used to set operating parameters. To enter the privileged-level:

Step 1 Enter the enable command at the EXEC prompt (>), and then enter a privileged-level password, as follows:

Router> enable

Password:

Router#

Step 2 Enter the configure terminal command to

enter configuration mode:

Router# configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#

Step 3 Enter the config-registervalue configuration command, where value is a hexadecimal number preceded by 0x, as in the following example:

Router(config)# config-register0x010F

Step 4 Press Ctrl-Zto exit configuration mode. Step 5 Save the new settings to NVRAM. Enter

the copy running-config startup-config command.

Note The new settings do not take effect until the system software is reloaded by rebooting the router.

Step 6 Enter the show version command to view the configuration register value currently in effect. The value is displayed on the last line of the screen display:

Configuration register is 0x141 (will be 0x101 at next reload)

Step 7 Reboot the router, and then perform a basic configuration using:

•AutoInstall (proceed to Step 8)

•Setup facility (proceed to the “Perform a Basic Configuration Using Setup” section on page 19)

•Configuration mode (proceed to the “Perform a Basic Configuration Using Configuration Mode” section on page 22)

Note Configuration register changes take effect only when the system reloads, such as when you issue a reload command from the console.

Configure Using AutoInstall

Step 8 Connect to the network using a serial (WAN) cable to the channel service unit/data service unit (CSU/DSU).

Step 9 Contact your system administrator to verify that the TCP/IP host on your network is preconfigured.

Step 10 Press Ctrl-Zto exit configuration mode. Step 11 At the # prompt, enter the copy

running-config startup-config command

to save the configuration to NVRAM as

follows:

Hostname# copy running-config startup-config

This completes the procedure for performing a basic

configuration using AutoInstall.

Page 19 Page 21
Page 20
Image 20
Cisco Systems 7576 quick start Start a Basic Configuration
Page 19 Page 21

7576 specifications

Cisco Systems 7576, part of the Catalyst line of switches, is designed for enterprise networks requiring robust performance and advanced features. This switch is known for its versatility, scalability, and reliability, making it a smart choice for organizations looking to support a wide range of applications.

One of the standout features of the Cisco 7576 is its capability to handle high throughput. With a switching capacity that exceeds traditional network switches, it accommodates heavy traffic loads, ideal for environments with dense users and devices. This throughput is complemented by support for advanced Layer 2 and Layer 3 protocols, including VLANs, Spanning Tree Protocol (STP), and Open Shortest Path First (OSPF), offering a diverse set of routing options.

The Cisco 7576 also prioritizes security, integrating several advanced security features. With support for Cisco TrustSec, it provides segmentation and access control based on user identity, ensuring that sensitive data remains protected. Additionally, the switch supports features like 802.1X port-based authentication and dynamic VLAN assignment, enhancing overall network security.

Another notable characteristic of the Cisco 7576 is its energy-efficiency. Equipped with Energy Efficient Ethernet (EEE), it helps reduce power consumption during low traffic periods, aligning with modern enterprises' sustainability goals. This focus on green technology is increasingly essential as organizations seek to minimize their environmental footprint.

Cisco's investment in automation and management is also evident in the 7576. The switch is compatible with Cisco DNA Center, which allows for intelligent operations and insights into the network. This integration enables real-time monitoring, automation of routine tasks, and proactive management of network issues, leading to lower operational costs and improved network performance.

Furthermore, the Cisco 7576 supports advanced Quality of Service (QoS) features, essential for environments that rely on voice and video applications. Administrators can prioritize bandwidth effectively, ensuring that critical applications receive the necessary resources for optimal performance.

In conclusion, the Cisco Systems 7576 switch merges superior performance and security features with energy efficiency and intelligent management options. It stands as a robust solution for enterprises seeking to build resilient, scalable, and secure networks that can evolve with their business needs.
Top Page Image Contents