Step 4 Note
Step 3

Install Field Replaceable Units (FRUs)

Copy the Configuration File for an RSP

Refer to the appropriate Cisco IOS software documentation for the configuration options available, and for specific configuration instructions, as needed.

Before you copy (save) the running configuration to a TFTP file server, ensure the following:

•You have a connection to the router either with a console terminal connected to the RSP console port or remotely through a Telnet session.

•The router is connected to a network supporting a file server (remote host).

•The remote host supports the TFTP application.

•You have the interface processor address or name of the remote host available.

Step 1 Enter the enable command at the EXEC prompt (>), and then enter a privileged-level password, as follows:

Router> enable

Password:

Router#

Step 2 Enter the ping command followed by the name or IP address of the remote server, and then press Return to check the connection between the router and the remote host.

Enter the show running-configcommand to display the currently running configuration on the terminal and ensure that the configuration information is complete and correct. If it is not, use the configure command to add or modify the existing configuration.

Create a file on the TFTP server.

Before you can save a file to a TFTP server, a file must first exist on the TFTP server. Create this file. Ensure that the filename matches the filename you will copy from the router. Also, ensure that the server permissions are set so the router can copy to this file.

Step 5 Enter the copy startup-config tftp command. The EXEC command interpreter prompts you for the name or interface processor address of the remote host that is to receive the configuration file. (The prompt might include the name or address of a default file server.)

Router# copy startup-config tftp

Remote host []?

Step 6 Enter the name or IP address of the remote host. In the following example, the name of the remote server is servername:

Router# copy startup-config tftp

Remote host []? servername

Translating "servername"...domain server (1.1.1.1) [OK]

31

Page 32 Page 34
Page 33
Image 33
Cisco Systems 7576 quick start Copy the Configuration File for an RSP
Page 32 Page 34

7576 specifications

Cisco Systems 7576, part of the Catalyst line of switches, is designed for enterprise networks requiring robust performance and advanced features. This switch is known for its versatility, scalability, and reliability, making it a smart choice for organizations looking to support a wide range of applications.

One of the standout features of the Cisco 7576 is its capability to handle high throughput. With a switching capacity that exceeds traditional network switches, it accommodates heavy traffic loads, ideal for environments with dense users and devices. This throughput is complemented by support for advanced Layer 2 and Layer 3 protocols, including VLANs, Spanning Tree Protocol (STP), and Open Shortest Path First (OSPF), offering a diverse set of routing options.

The Cisco 7576 also prioritizes security, integrating several advanced security features. With support for Cisco TrustSec, it provides segmentation and access control based on user identity, ensuring that sensitive data remains protected. Additionally, the switch supports features like 802.1X port-based authentication and dynamic VLAN assignment, enhancing overall network security.

Another notable characteristic of the Cisco 7576 is its energy-efficiency. Equipped with Energy Efficient Ethernet (EEE), it helps reduce power consumption during low traffic periods, aligning with modern enterprises' sustainability goals. This focus on green technology is increasingly essential as organizations seek to minimize their environmental footprint.

Cisco's investment in automation and management is also evident in the 7576. The switch is compatible with Cisco DNA Center, which allows for intelligent operations and insights into the network. This integration enables real-time monitoring, automation of routine tasks, and proactive management of network issues, leading to lower operational costs and improved network performance.

Furthermore, the Cisco 7576 supports advanced Quality of Service (QoS) features, essential for environments that rely on voice and video applications. Administrators can prioritize bandwidth effectively, ensuring that critical applications receive the necessary resources for optimal performance.

In conclusion, the Cisco Systems 7576 switch merges superior performance and security features with energy efficiency and intelligent management options. It stands as a robust solution for enterprises seeking to build resilient, scalable, and secure networks that can evolve with their business needs.
Top Page Image Contents