Cisco Systems 760 quick start Connect the Ethernet Cable to a Computer or Hub

2Connect the Ethernet Cable to a Computer or Hub

Option 1: To connect the Ethernet cable to a computer, go to option 1 below.

Option 2: To connect the Ethernet cable to a hub, go to option 2 below.

Option 1 Connect the Ethernet Cable to a Computer

1 Connect the yellow Ethernet cable to the

		yellow	port labeled ETHERNET on the
	rear panel of your router.
2	Connect the other end of the cable to the
	Ethernet connector on the back of your
	computer.
3	Set the node-hub switch to the “HUB”
	position.

CONFIG 10BASET

NODE HUB

1

CISCO 776

ISDN S/T

+5V ---1.5A +/-5% -30V--- 0.2A +/-25% S 0

4

2

Option 2 Connect the Ethernet Cable to a Hub

1

2

3

Connect the yellow Ethernet cable to the

yellow port labeled ETHERNET on the rear panel of your router.

Connect the other end of the cable to an available port on your Ethernet hub.

Set the node-hub switch to the “NODE” position.

CONFIG	10BASET
	CISCO 776

NODE	HUB	ISDN S/T		ISDN U
1
				+5V ---	1.5A +/-5%
				-30V---	0.2A +/-25%
3		S	0	NT-1

2 Ethernet hub

Ethernet cable