Cisco Systems 760 quick start Connect the ISDN Line, North America Only, Outside North America

Option 2:

Option 1:

2Connect the ISDN Line

Check the rear panel of your router to find out which model you have.

If you have a Cisco 762 or 766, go to option 1 below.

If you have a Cisco 761 or 765, go to option 2 below.

Option 1 Connect the ISDN Line to a Cisco 762 or Cisco 766 Router

1

2

Connect the red ISDN U cable to the red port

labeled ISDN U on the rear panel of your router.

Connect the other end of the ISDN U cable directly to an RJ-45 ISDN wall jack. If necessary, use the enclosed RJ-45-to-RJ-11 adapter to connect to an RJ-11 ISDN wall jack.

CONFIG 10BASET

NODE HUB

CISCO 776

ISDN S/T		ISDN U
S	0	NT-1

1

+5V ---1.5A +/-5% -30V--- 0.2A +/-25%

2.		2
		RJ-45
	ISDN U	wall jack
	cable
	RJ-11
	wall jack
Option 2 Connect the ISDN Line to a Cisco 761 or Cisco 765 Router
Outside North America

5

1 Connect the orange ISDN S/T cable to the orange

port labeled ISDN S/T on the rear panel of your router.

2 Connect the other end of the ISDN S/T cable to the ISDN wall socket.

CO	10BASET
NFIG

NODE HUB

ISDN S/T cable

CISCO 776

ISDN S/T

S 0

1

2

+5V ---1.5A +/-5%

-30V--- 0.2A +/-25%

ISDN

wall socket

North America Only

1
	Connect the	orange ISDN S/T cable to the			orange
	port labeled ISDN S/T on the rear panel of your
	router.
2
	Connect the other end of the		orange	ISDN S/T
	cable to the NT1 terminal connector.
3	Connect the NT1 terminal connector to the
	ISDN wall jack using the ISDN S/T cable that
	came with your NT1 terminal connector.

CONFIG 10BASET

		CISCO 776
NODE	HUB	ISDN S/T		ISDN U
					+5V ---
					1.5A +/-5%
					-30V---
					0.2A +/-25%
		S	0	NT-1
		1
	ISDN S/T				NT1 terminal connec
					(not included)
	cable
		2			3
		ISDN S/T cable			RJ-45
					wall jack
		(not included)