Verifying Basic Hardware
Figure 2 | Cisco SFS 7008P Switch Front ViewWithout Bezel |
Status LED | |
Power Supply |
|
identity LED |
|
System |
|
Status LED | Power supplies |
Fan | Fan |
Node slot 1 | Slot 9 |
Node slot 2 | Slot 10 |
Core slot 1 
Slot 11
Core slot 2 | Slot 12 |
Node slot 3 | Slot 13 |
Node slot 4 | Slot 14 |
| 154497 |
Fan tray LED
Step 4 Verify that you have at least one power supply installed. (See Figure 2.)
Step 5 Verify that you have at least one fan module installed. (See Figure 2.)
Step 6 Verify that you have at least one fabric module installed in one of the node slots. The node slots are 9, 10, 13 and 14. (See Figure 2.)
Step 7 Verify that you have two LIMs installed for each fabric module in the node slots. See Figure 3 for an example of the connections between the LIMs and the fabric modules in the node slots:
Cisco SFS 7008P InfiniBand Server Switch Installation and Configuration Note
| 5 |
| |
|
|
