4-7
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Chapter 4 Adding the Cisco IP Phone 7914 Expansion Module
Installing the 7914Expansion Module
Figure 4-3 Connector Pins on the Support Bar
Connecting the 7914 Expansion Module to the Support Bar
To connect the ExpansionModule to the support bar, follow these steps.
Procedure
Step 1 Position the phone so that the front of the phone is facing up.
Step 2 Line up the two open slots on the bottom of the 7914 Expansion Module with the
two hooks on the support bar. Insert the hooks into the slots a nd then rotate the
top of the 7914 Expansion Module into the support bar so that it rests flush with
the bar.
Step 3 Tighten the thumb screw on the back of the 7914 Expansion Module.
Note If you are installing two Expansion Modules, repeat Steps 2 and 3 f or the second
Expansion Module.