5-21
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Chapter 5 Configuring Network Settings on the Cisco IP Phone
Configuring TFTP Options
Step 8 Press Validate.
Step 9 Press Save.
Cisco IP Phone 7910
Procedure
Step 1 Press settings.
Step 2 Press 6 (Network Configuration).
Step 3 Use the down volume key to select Admin VLAN ID setting.
Step 4 Press * to edit.
Step 5 Use the buttons on the dial pad to enter the new Admin VLAN ID, using the down
arrow to backspace.
Step 6 Press # to save.
Configuring TFTP Options
If you do not use DHCP to direct the Cisco IP Phone 796 0 to a TFTP server, you
must manually assign one. You can also assign an alternative TFTP server to use
instead of the one assigned by DHCP.
This section covers these topics:
•Assigning a TFTP Sever, page 5-21
•Using an Alternate TFTP Server, page 5-23

Assigning a TFTP Sever

The default TFTP server is set to CiscoCM1. If you are not using DHCP in your
network, and you want to change this setting , you must manually assign the TFTP
server to the phone.