B-1
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12641-01

APPENDIX

B

Feature Support by Protocol for Cisco Unified

IP Phone 7962G and 7942G

This appendix provides information about feature support for the CiscoUnified IP Phone 7962G and
7942G using the SCCP or SIP protocol with CiscoUnified Communications Manager Release 6.0.
Table B -1 provides a high-level overview of calling features and their support by protocol. This table
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user interface differences and feature use, refer to the
Cisco Unified IPPhone 7962G and 7942G Phone Guide for Cisco Unified Communications Manager
6.0.
This guide is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
The specific sections that describe the features in the phone guide are referenced in Tabl e B-1.
TableB-1 CiscoUnified IP Phone 7962G and 7942G Feature Support by Protocol
Features
Cisco Unified IP Phones 7962G, 7942G
For More InformationSCCP SIP
Calling Features
Abbreviated Dialing Supported Supported “Basic Call Handling—Placing a
Call: Additional Options”
Answer Release Supported Supported
Audible Message
Waiting Indicator
Supported Supported “Accessing Voice Messages”
Auto Answer Supported Supported “Using a Handset, Headset, and
Speakerphone—Using Auto Answer”
Auto Dial Supported Supported “Basic Call Handling—Placing a
Call: Basic Options”
Barge (and cBarge) Supported Supported “Advanced Call Handling—Using a
Shared Line”
Busy Lamp Field
(BLF) Call Lists
Supported Supported “Advanced Call
Handling—Determining if Another
Line is Busy or Idle”