Installing the Antenna
Site Selection
Before attempting to install your antenna, determine where you can best place the antenna for safety and performance.
Follow these steps to determine a safe distance from wires, power lines, and trees.
Step 1 Measure the height of your antenna.
Step 2 Add this length to the length of your tower or mast and then double this total for the minimum recommended safe distance.
Caution If you are unable to maintain this safe distance, stop and get professional help.
Generally, the higher an antenna is above the ground, the better it performs. Good practice is to install your antenna about 5 to 10 ft (1.5 to 3 m) above the roof line and away from all power lines and obstructions. If possible, find a mounting place directly above your wireless device so that the
Installing the Antenna
You can install the antenna on a pole from 1.63” to 2.3” pipe O.D. The mounting options allow the antenna to be vertically or horizontally polarized.
Tools and Equipment Required
An installation kit is shipped with the antenna and consists of the panel antenna with adjustable mount and hardware, including:
•Antenna mount bracket
•Elevation adjustable bracket
•Azimuth adjustable bracket
•Four
•Six
•Six
•Six
•Two pipe clamps
To attach the mount to the antenna and secure it to the pole, you need the following tools and equipment, which are not provided.
•
•
The following sections contain typical procedures for installing the antenna on a pole. Your installation may vary. Before you begin, you may want to refer to Figure 1.
Cisco Aironet
| 5 |
| |
|
|
