Warning | IMPORTANT SAFETY INSTRUCTIONS |
Warning
Warning
Warning
Warning
Warning
Caution
Caution
Note
Note
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
Read the installation instructions before you connect the system to its power source. Statement 1004
Installation of the equipment must comply with local and national electrical codes. Statement 1074
This product relies on the building’s installation for
20A. Statement 1005
Do not operate your wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be especially qualified for such use. Statement 245B
In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a minimum of 7.9 inches (20 cm) or more from the body of all persons.
Statement 332
The fasteners you use to mount an access point on a ceiling must be capable of maintaining a minimum pullout force of 20 lbs (9 kg) and must use all 4 holes on the mounting bracket.
This product and all interconnected equipment must be installed indoors within the same building, including the associated LAN connections as defined by Environment A of the IEEE 802.af Standard.
The access point is suitable for use in environmental air space in accordance with section 300.22.C of the National Electrical Code and sections
Use only with listed ITE equipment.
3
