Introduction

Introduction

The Cisco AS5200 universal access server is a multifaceted data communications platform that provides all the functions of an access server, a router, modems, and terminal adapters (TAs) in a modular chassis. Mid-sized organizations or service providers requiring centralized processing capabilities for mobile users and telecommuters will benefit the most using the Cisco AS5200 universal access server.

With its optimization for high-speed modem access, the Cisco AS5200 universal access server is ideally suited for all traditional dial-up applications, such as host access, electronic mail, file transfer, and dial-in access to a local area network.

For information on new features and Cisco IOS commands supported by Cisco IOS Release 11.2(26) P, see the “New and Changed Information” section on page 9 and the “Related Documentation” section on page 14.

System Requirements

This section describes the system requirements for Cisco IOS Release 11.2 P:

Memory Recommendations, page 2

Supported Hardware, page 3

Determining the Software Version, page 3

Upgrading to a New Software Release, page 3

Feature Set Tables, page 4

Memory Recommendations

Table 1 lists the memory recommendations for the Cisco AS5200.

Note Beginning with Cisco IOS Release 10.3, some software image sizes exceed 4 MB and, when compressed, exceed 2 MB. Also, some systems now require more than 1 MB of main system memory for data structure tables.

Table 1

Memory Recommendations for the Cisco AS5200

 

 

 

 

 

 

 

 

 

Software

Recommended

Recommended

Runs

Image Name

Image

Flash Memory

DRAM Memory

From1

IP

 

c5200-i-l

8 MB

8 MB

Flash

 

 

 

 

 

 

IP Plus2

 

c5200-is-l

8 MB

8 MB

Flash

Desktop

 

c5200-d-lt

8 MB

8 MB

Flash

 

 

 

 

 

Desktop Plus

c5200-ds-l

8 MB

8 MB

Flash

 

 

 

 

 

 

Enterprise

 

c5200-j-l

16 MB

8 MB

Flash

 

 

 

 

 

Enterprise Plus

c5200-js-l

16 MB

8 MB

Flash

 

 

 

 

 

 

1.When a system is running from Flash memory, you cannot update the system while it is running. You must use the Flash memory load helper.

2.IP Plus for the Cisco AS5200 includes protocol translation, MMP, VPDN, V.120, RMON, Managed Modems, and IBM (if IBM is not already included).

 

Release Notes for Cisco AS5200 Universal Access Servers for Cisco IOS Release 11.2 P

2

78-5214-15 Rev. A0

Page 2
Image 2
Cisco Systems AS5200 manual Introduction, System Requirements, Memory Recommendations