Cisco Systems AS5300 Connect the Serial Port for WAN Access, transition, Internet, cable

Connect the Serial Port for WAN Access

Use a serial 12-in-1 cable (DTE if connecting to a DSU or DCE if connecting to a CSU) to connect one of the four synchronous serial ports on the E1 or T1 PRI cards (with serial support) to a modem or a CSU or DSU. The CSU or DSU provides access to a WAN.

Step 1 Connect the serial 12-in-1 cable connector on the serial cable to the serial port on the rear panel of the Cisco AS5300.

Step 2 Connect the EIA/TIA-232, EIA/TIA-449, EIA/TIA-530A, EIA-530, V.35, or X.21 connector to the CSU or DSU.

PORT SELECT

RA

A

LB

LA

S A

S A

S A

0

1

S

A

S A

S A

T1

2

3

4

S A

S

5

6

7

T0

T3

T2

ACT OK

RX

TX

Synchronous serial	Universal access
port (DB-26)	server
Serial
transition		Internet
cable

CSU/DSU or

other DCE or DTE

EIA/TIA-232, EIA/TIA-449, EIA/TIA-530A,

EIA-530, V.35 or X.21 connector

15874

10