4Configure the Cisco AS5300
Use any of the following options for configuring your Cisco AS5300:
•Cisco Fast Step Software
•Cisco IOS Release Setup Script
•Initial Configuration Using the CLI (Manual Configuration)
•Configuring VoIP
The option you select depends on how you want to configure your Cisco AS5300. Use the following information to help you decide which option to select.
Using Cisco Fast Step Software
Cisco Fast Step is a setup utility with a graphical user interface. It provides easy,
•Protocols and services (IP, IPX, and NetBEUI)
•LAN or WAN topology of
•Controller settings (PRI or channelized T1/E1 interfaces)
•WAN encapsulation settings (Frame Relay and HDLC)
•LAN or WAN side IP or IPX settings
•
•IP address pools or DHCP server settings for
•Cisco AS5300 security and security server settings
•Routing protocol settings including default and
For all other configurations, use the Cisco IOS release setup script (see the section, “Cisco IOS Release Setup Script,” later in this section) or refer to the Cisco AS5300 Universal Access Server Software Configuration Guide for detailed instructions on using the
Cisco Fast Step Software
Install and Run Cisco Fast Step
Step 1 Insert the Cisco Fast Step
Step 2 The Fast Step install program starts Setup.exe automatically. If it does not, use the following steps to start the Fast Step program:
Step 3
Step 4
Step 5
The install program prompts you for the information it needs to install Cisco Fast Step, then copies the software to your hard drive.
17