Cisco Systems AS5300 quick start Initial Configuration Using the CLI Manual Configuration

--- System Configuration Dialog ---

Step 2 When the following prompt appears, enter yes to continue:

Would you like to enter the initial configuration dialog? [yes]: yes

At any point you may enter a question mark '?' for help.

Use ctrl-c to abort configuration dialog at any prompt.

Default settings are in square brackets '[]'.

When you are done selecting options and saving the script, the Cisco AS5300 displays the 5300> prompt, which indicates that you are at the command-line interface (CLI) and you have just completed the basic Cisco AS5300 configuration. However, this is not a complete configuration. At this point you have two options:

•Run the setup script again and create another configuration by entering the following commands:

5300> enable

Password: password 5300# setup

•Modify the existing configuration or configure additional features with the CLI as described in the Cisco AS5300 Universal Access Server Software Configuration Guide.

Initial Configuration Using the CLI (Manual Configuration)

This section shows how to bring up a command line interface (CLI) prompt for configuration using the CLI, and it directs you to the documentation for CLI configuration.

Step 1 To proceed with manual configuration using the CLI, enter no.

Would you like to enter the initial configuration dialog? [yes/no]: no

Step 2 Press Return to terminate autoinstall and continue with manual configuration.

Would you like to terminate autoinstall? [yes] Return

Several messages are displayed, ending with a line similar to the following:

...

Copyright (c) 1986-2000 by cisco Systems, Inc.

Compiled <date> <time> by <person>

Step 3 Press Return to bring up the Router> prompt.

...

flashfs[4]: Initialization complete. Router>

Step 4 Enter privileged EXEC mode.

Router> enable

Router#

The router is now ready for configuration using the CLI.

For configuration using the CLI, refer to the applicable configuration procedures in the Cisco AS5300 Universal Access Server Software Configuration Guide.

You can access this document at: Cisco Product Documentation > Access Servers & Routers > Access Routers > Cisco AS5300 > Configuration Documents for Cisco AS5300 > AS5300 Software Configuration Guide

19