13-7
Cisco ASA Series Firewall CLI Configuration Guide
Chapter13 Configuring Inspection for Management Application Protocols
GTP Inspection
Enter this command separately for each timeout.
The gsn keyword specifies the period of inactivity after which a GSN will be removed.
The pdp-context keyword specifies the maximum period of time allowed before beginning to
receive the PDP context.
The request keyword specifies the maximum period of time allowed before beginning to receive the
GTP message.
The signaling keyword specifies the period of inactivity after which the GTP signaling will be
removed.
The tunnel keyword specifies the period of inactivity after which the GTP tunnel will be torn down.
The hh:mm:ss argument is the timeout where hh specifies the hour, mm specifies the minutes, and
ss specifies the seconds. The value 0 means never tear down.
j. To specify the maximum number of GTP tunnels allowed to be active on the ASA, enter the
following command:
ciscoasa(config-gtp-map)# tunnel-limit max_tunnels
where the max_tunnels argument is the maximum number of tunnels allowed, from 1 to
4294967295. The default is 500.
New requests will be dropped once the number of tunnels specified by this command is reached.
The following example shows how to limit the number of tunnels in the network:
ciscoasa(config)# policy-map type inspect gtp gmap
ciscoasa(config-pmap)# parameters
ciscoasa(config-pmap-p)# tunnel-limit 3000
ciscoasa(config)# policy-map global_policy
ciscoasa(config-pmap)# class inspection_default
ciscoasa(config-pmap-c)# inspect gtp gmap
ciscoasa(config)# service-policy global_policy global
Verifying and Monitoring GTP Inspection
To display GTP configuration, enter the show service-policy inspect gtp command in privileged EXEC
mode. For the detailed syntax for this command, see the command page in the command reference.
Use the show service-policy inspect gtp statistics command to show the statistics for GTP inspection.
The following is sample output from the show service-policy inspect gtp statistics command:
ciscoasa# show service-policy inspect gtp statistics
GPRS GTP Statistics:
version_not_support 0 msg_too_short 0
unknown_msg 0 unexpected_sig_msg 0
unexpected_data_msg 0 ie_duplicated 0
mandatory_ie_missing 0 mandatory_ie_incorrect 0
optional_ie_incorrect 0 ie_unknown 0
ie_out_of_order 0 ie_unexpected 0
total_forwarded 0 total_dropped 0
signalling_msg_dropped 0 data_msg_dropped 0
signalling_msg_forwarded 0 data_msg_forwarded 0
total created_pdp 0 total deleted_pdp 0