11-11
Cisco ASA Series Firewall CLI Configuration Guide
Chapter11 Configuring Inspection for Voice and Video Protocols
MGCP Inspection
Total: 1
GK Caller
172.30.254.214 10.130.56.14
This output shows that there is one active registration between the gatekeeper 172.30.254.214 and its
client 10.130.56.14.
MGCP Inspection
This section describes MGCP application inspection. This section includes the following topics:
•MGCP Inspection Overview, page11-11
•Configuring an MGCP Inspection Policy Map for Additional Inspection Control, page11-12
•Configuring MGCP Timeout Values, page11-13
•Verifying and Monitoring MGCP Inspection, page11-14

MGCP Inspection Overview

MGCP is a master/slave protocol used to control media gateways from external call control elements
called media gateway controllers or call agents. A media gateway is typically a network element that
provides conversion between the audio signals carried on telephone circuits and data packets carried over
the Internet or over other packet networks. Using NAT and PAT with MGCP lets you support a large
number of devices on an internal network with a limited set of external (global) addresses. Examples of
media gateways are:
•Trunking gateways, that interface between the telephone network and a Voice over IP network. Such
gateways typically manage a large number of digital circuits.
•Residential gateways, that provide a traditional analog (RJ11) interface to a Voice over IP network.
Examples of residential gateways include cable modem/cable set-top boxes, xDSL devices,
broad-band wireless devices.
•Business gateways, that provide a traditional digital PBX interface or an integrated soft PBX
interface to a Voice over IP network.
Note To avoid policy failure when upgrading from ASA version 7.1, all layer 7 and layer 3 policies must have
distinct names. For instance, a previously configured policy map with the same name as a previously
configured MGCP map must be changed before the upgrade.
MGCP messages are transmitted over UDP. A response is sent back to the source address (IP address
and UDP port number) of the command, but the response may not arrive from the same address as the
command was sent to. This can happen when multiple call agents are being used in a failover
configuration and the call agent that received the command has passed control to a backup call agent,
which then sends the response.
MGCP endpoints are physical or virtual sources and destinations for data. Media gateways contain
endpoints on which the call agent can create, modify and delete connections to establish and control
media sessions with other multimedia endpoints. Also, the call agent can instruct the endpoints to detect
certain events and generate signals. The endpoints automatically communicate changes in service state
to the call agent.