Epson ELP-811, ELP-600, ELP-800UG, ELP-820 Replacing the Air Filter, Install the new air filter

Replacing the Air Filter

Procedure

1 Turn off the projector power, wait for the cool-down period to end, and then disconnect the power cord.

The cool-down period lasts for about 2 minutes. The actual time will vary depending on the external air temperature.

2 Put your finger into the recess in the air filter hook, and lift up the air filter to remove it.

In order to prevent any dust on the air filter from getting into the projector, be sure to stand up the projector so that the handle is at the top.

3 Install the new air filter.

First insert the tabs, and then press down on the opposite side until it clicks into place.

Tip :

Dispose of used air filters properly in accordance with your local regulations.

97