Epson ELP-600, ELP-811 Saving a Users Logo, Select Yes in the sub-menu, Then press the button

Saving a User's Logo

You can record the image that is currently being projected as a user's logo.

Procedure

1 Project the image that you would like to use as a user's logo, and then press the [Menu] button on the projector’s control panel or the remote control.

2 Select the User's Logo menu, and

then press the button.

Tip :

If keystone correction has been carried out, it will

be canceled when the User's Logo menu is selected.

3 Select Yes in the sub-menu, and

then press the button.

4 The image to be recorded and a selection marquee box will be displayed. Move the marquee box to select the part of the image to use.

Tilt the button on the remote control to select the part of the image to use as the

user’s logo, and then press the button.

Tip :

If the video signal being input is a YCbCr or YPbPr signal, the selection marquee box can only be moved around the middle of the image.

98