Epson EMP-800UG, ELP-811, ELP-600 Take out the lamp, Install the new lamp, Install the lamp cover

4

5

6

Take out the lamp.

Hold the lamp by the two recesses on the side to lift it up and out from the projector.

Install the new lamp.

Hold the lamp so that it faces the correct way to fit into the projector, and then insert the lamp until it clicks into place and tighten the two fixing screws.

Install the lamp cover.

Insert the two cover tabs into the projector, and then press the other side of the lamp cover until it clicks into place.

Tip :

•Install the lamp securely. If the lamp cover is removed, the lamp turns off automatically as a safety precaution. Moreover, the lamp will not turn on if the lamp or the lamp cover is not installed correctly.

•Replacement lamps are provided with a spare air filter. The air filter should also be replaced when the lamp is replaced.

•Dispose of used lamps properly in accordance with your local regulations.

95