Epson ELP-820, ELP-811, ELP-600, ELP-800UG Turning On the Power and Projecting Images, Procedure

Turning On the Power and Projecting Images

Procedure

1 Turn on the power for all equipment connected to the projector.

For a video source, press the [Play] button at the video source to start playback if necessary.

2 Check that the operation indicator has stopped flashing and lights orange.

Operation indicator lights orange

3 If using the remote control, set the R/C switch on the remote control to the ON position.

4 Press the [Power] button on either the remote control or the projector's control panel to turn on the power for the projector.

The operation indicator flashes green, and after a short period projection starts. Depending on the settings, the message "No-Signal." may appear. ( P.70)

5 Check that the operation indicator has stopped flashing and lights green.

Tip :

The projector buttons cannot be operated while the

operation indicator is flashing green. Wait until it lights steadily.

Power

Power	Help
		A/V Mute Freeze
Computer/YCbCr	Video
		E-Zoom
Source
Menu	Esc
Sync+
Tracking - A to	Tracking +
Projector		Remote control

Operation indicator stops flashing and lights green

37