Epson EMP-820 Adjusting the Image Angle, Procedure, Adjusting the Screen Image, Seen from above

Adjusting the Screen Image

Adjusting the Image Angle

You can change the projection angle for the projector. The projector should be as perpendicular to the screen as possible.

Seen from the side Seen from above

You can extend or retract the front adjustable foot to adjust the projection angle within a maximum range of 12° .

Procedure

While pressing the foot adjust button, lift up the front of the projector so that the front adjustable foot can extend.

Extend the front adjustable foot until the desired angle is obtained, and then release the foot adjust button.

Foot adjust button

Tip :

•When the foot is adjusted, it may cause the size of the projected images to become distorted. Use the keystone correction function to adjust this distortion. (P.44)

•To retract the front adjustable foot, keep pressing the foot adjust button. The front adjustable foot will slowly retract inside the projector.

•If the projector is tilted horizontally, turn the rear adjustable foot to adjust the angle.

42