Epson ELP-800UG manual Turning On the Projector, Connecting the Power Cord, Power inlet Lit orange

Turning On the Projector

Turn on the power to start projecting images.

Be sure to read the separate Safety Instructions/World-Wide Warranty Terms and check the points that must be noted before using the projector to project images.

Connecting the Power Cord

Procedure

1 Check that the power is turned off for the projector and all components connected to the projector.

2 Connect the computer or other video source to the projector. (P.19, 29)

3 Remove the lens cover.

Place your finger under the top of the lens cover and pull to remove the cover.

4 Connect the accessory power cord to the projector.

Check that the power cord connector is facing the same way as the power inlet on the projector, and then insert the power cord connector securely into the projector.

5 Connect the other end of the power cord to a grounded electrical outlet.

The operation indicator lights orange.

Tip :

The projector buttons cannot be operated while the operation indicator is flashing orange. Wait until it lights steadily.

Power inlet

Lit orange

36