Epson EMP-810UG, ELP-811, ELP-600, ELP-800UG, ELP-820 If the monitor port is a digital RGB connector

If the monitor port is a digital RGB connector

If the computer has a standard DVI or DFP -compliant digital video card or video output port, use an optional digital video cable or DVI analog cable to connect the monitor port of the computer to the Computer 1 port at the rear of the projector. The type of connection cable used will vary depending on the specifications for the computer's monitor port.

See “Appendix: Optional Accessories” (P.100)

To digital RGB

output port

To Computer 1 port

Digital video cable or DVI analog cable

(optional)

Tip :

•You may need to change the computer settings when switching the computer output to digital RGB. Refer to the documentation for the computer for details.

•If you are connecting a computer with a mini D-Sub 15-pin output port to the projector at the same time, connect the computer with the mini D-Sub 15-pin output port to the Computer 2/Component Video port of the projector.

•After making the connections, change the Comp1 Input setting in the Setting menu to Digital-RGB. (P.69)

21