Manuals / Epson / Computer Equipment / Projector

Epson ELP-820, ELP-811 manual About menu, Computer Digital-RGB, Analog-RGB, RGB-Video, YCbCr, YPbPr

Models: EMP-800UG ELP-820 ELP-600 EMP-810UG ELP-800UG EMP-811 ELP-811 ELP-810UG EMP-820

1 120

Download 120 pages 12.53 Kb

Page 75

About menu

•The About menu shows the setting details for the current video source.

•The Lamp setting appears as 0H for 0 – 10 hours, after that, it appears in units of 1 hour.

Computer

Computer (Digital-RGB, Analog-RGB, RGB-Video, YCbCr, YPbPr)

	Main menu	Sub-menu	Function	Default
	Main menu	Sub-menu	Function	setting
				setting

	About	Lamp	Displays the cumulative lamp operating time.	0H
			• When the lamp warning period is reached, the
			display characters appear in red.
		Reset Lamp	Initializes the lamp operating time. When this	-
		Timer	command is selected, the cumulative lamp operating
			time is reset to the initial default value.
		Video Source	Displays the input source which is currently being
			projected.
		Input Signal	Displays the input signal settings.
		Frequency	Displays the horizontal scanning frequency.
		SYNC Polarity	Displays the synchronization polarity.	-
		SYNC Mode	Displays the synchronization attributes.	-
		Resolution	Displays the input resolution.	-
		Refresh Rate	Displays the refresh rate.	-

73

Image 75

Epson ELP-820, ELP-811, ELP-600, ELP-800UG, ELP-810UG About menu, Computer Digital-RGB, Analog-RGB, RGB-Video, YCbCr, YPbPr

Contents

Page User’s Guide this manual Safety Instructions/World-Wide Warranty TermsGeneral information Meaning of unit and projector Documentation Unpacking the Projector Horizontal and vertical keystone correction function Features of the Projector Brilliant, Attractive Images Contents 106 100101 103Page Connecting to an External Speaker Before Using the Remote ControlConnecting to a Computer Connecting to a Video Source Front/Top Part Names and Functions Control panel Part Names and Functions Rear Front adjustable foot Air filter air inlet P.92 BaseSuspension bracket fixing points 4 points Remote control Before Using the Remote Control Battery Replacement Period and CautionsInserting the Batteries Operating distance Operating angle Using the Remote Control and Remote Operating RangeUsing the Remote Control Remote Operating Range Approx Remote control transmitter Approx. ±15 vertically Approx Approx When suspended from the ceilingApprox. ±30 Horizontally Installation Setting Up the ProjectorFront projection Front/ceiling projection Page Screen size cm ft Approximate projection distance* m ft InstallationScreen Size and Projection Distance Recommended distance Eligible Computers Connecting to a Computer If the monitor port is a mini D-Sub 15-pin port When connecting to the Computer 2/Component Video portAccessory Projecting Images from the Computer If the monitor port is a digital RGB connector If the monitor port is a 5BNC port To monitor port Computer cable To Computer OptionalComponent Video port To monitor port 13w3 cable commercially-available If the monitor port is a 13w3 port USB cable Accessory To USB port Playing Sound from the ComputerAudio cable Commercially-available To audio output port Computer Mouse used Applicable cable Using the Remote Control to Operate the Mouse PointerTo PS/2 mouse port PS/2 mouse cable accessory To Mouse port Example of PS/2 mouse connection To USB mouse port Example of USB mouse connection Moving the mouse Left click Right click Pointer Monitor port Cable provided with monitor Connecting to an External Monitor Connecting to a Video Source When connecting using the A/V cableProjecting Composite Video Images To S-Video port To video output When connecting the audio output using an A/V cableTo audio output R port red Accessory Projecting S-Video Images To Computer 2/Component Video port To video output Port Projecting Component Video Images To Computer 2/Component Video port Projecting RGB Video Images Tip Connecting to an External Speaker To external audioEquipment Turning Off the Projector Adjusting the Screen Image Adjusting the Image QualityTurning On the Projector Turning On the Projector Connecting the Power CordConnect the accessory power cord to the projector Power inlet Lit orange Turning On the Power and Projecting Images Operation indicator lights orangeProjector After startup, change Macintosh Check that the cool-down is complete Pressmore. the Power button onceOperation indicator stops flashing and lights orange Turning Off the Projector Retract the front adjustable foot if it is extended Foot adjust buttonAttach the lens cover Turn to Tele to reduce the size Adjusting the Screen ImageAdjusting the Image Size Turn the zoom ring on the projector to adjust the image Seen from the side Adjusting the Image Angle Approx to the right Approx to the left When tilted verticallyWhen tilted horizontally Approx above Correcting Keystone Distortion Correcting vertical keystone distortionCorrecting horizontal keystone distortion Tip Automatic adjustment Adjusting the Image QualityFocusing the Screen Image Adjusting Computer Images Adjusting the tracking Adjusting the synchronization Projectors control panel Adjusting the VolumePress the Volume Button on Either the remote control orPage Functions for Enhancing Projection Using the Projector Menu Functions Mute Functions for Enhancing ProjectionList of Functions Function Details Black Blue Users logo Default setting Freeze Press the Freeze button on the remote control Changing the display position for 169 display Wide-screen ProjectionFor Sdtv For Hdtv Press the E-Zoom button on the remote control Remote control CrossZoom Tip Select the type of pointer icon or bar Remote control to select the typeEffects Effect Canceling effects Picture in Picture P in P Size Approx /3.2 Approx /2.8 Approx /2.5 Approx /2.3 Analog-RGB Digital-RGB Using the Projector Menu FunctionsVideo menu Main menu Sub-menu Computer Analog-RGB, Digital-RGB Main menu Sub-menu Function Default Setting Using the Projector Menu Functions RGB-Video Video,Video Component YCbCr, YPbPr Video RGB-Video, YCbCr, YPbPr, S-Video, Video Using the Projector Menu Functions Audio menu Effect menu Default Main menu Sub-menuFunction Setting Setting menu Using the Projector Menu Functions Users Logo menu OFF Advanced menu About menu Computer Digital-RGB, Analog-RGB, RGB-Video, YCbCr, YPbPrComputer Reset All menu Video S-Video, VideoVideo Select a sub-menu item Using the MenusSelect a menu item Confirm the selection Using the Projector Menu Functions Select a setting value Select other menu items in the same wayClose the menu List of Supported Monitor Displays 106 Optional Accessories 100List of ESC/VP21 Commands 103 101 Using the Help Troubleshooting Tip Indicator status Projector Problem and remedy When Having Some TroubleTroubleshooting Operation indicator Lamp indicator Temperature indicator Conditions in Safety Instructions/World Projecting No abnormality Progress Try resetting all of the current settings When the Indicators Provide No HelpIs sleep mode active? Is a video signal being input? Displayed Does the input signal match the connected source?No images appear Messages do appear Not Supported is Are the image signal format settings correct? Poor image qualityIs the projector at the correct distance? Image is distorted Image contains interference Has the correct resolution been selected?Are the cables connected correctly? Is an extension cable being used? Images appear dark Only part of the image is displayed Large/small Image colors are not right Have the color intensity and tint been adjusted correctly? No sound can be heard Is sound being output from the audio source?Is sound being output to external speakers? Operation indicator remains orange Remote control does not workPower does not turn off after the Power button is pressed Is the remote control too far from the projector? Cleaning the Lens MaintenanceCleaning Cleaning the Projector Case Maintenance Cleaning the Air Filter Projected image gets darker or starts to deteriorate Lamp Replacement PeriodLamp indicator flashes orange or lights red Replacing Consumables Loosen the two lamp fixing screws Replacing the Lamp Install the new lamp Install the lamp coverTake out the lamp Resetting the Lamp Operating Time Replacing the Air Filter Install the new air filter Select Yes in the sub-menu, Then press the button Saving a Users Logo Tip 100 Optional Accessories 101 Glossary 102 Glossary 103 List of ESC/VP21 CommandsCommand List Command Communication protocol USB Connection Setup 105 Cable layoutsSerial connection USB connection 106 List of Supported Monitor Displays Specifications 108 Safety 33.7 46.8 97.2 16.7 116.5 90.8 AppearanceUnits mm 109 104 114 348 33.4 187 R3.8 M4x10 136 274 103.2 12.8 110 Index 111 112 Index 113 Page Declaration of Conformity FCC Compliance Statement For United States Users Page 402520600