Epson EMP-800UG Are the cables connected correctly?, Has the correct resolution been selected?

Troubleshooting

•Image is distorted

•Image contains interference

•Are the cables connected correctly?

(P.19 – P.33)

•Has the correct resolution been selected?

Set the computer so that the signals that are output are compatible with this projector. Refer to the documentation provided with your computer for details on changing the settings. (P.106)

•Have the synchronization, tracking and display position been adjusted correctly?

Press the [Auto] button to adjust these settings. You can also use the menus to make the adjustment. (P.46, 63)

•Is an extension cable being used?

If an extension cable is used, electrical interference may increase. Use the accessory cables provided, or connect a signal amplifier and see if this helps.

•Are the image signal format settings correct?

Use the Video Signal command in the Video menu to select the video signal format. The projector may not be able to automatically identify some types of video signal that are input. (P.66)

•Does the input signal match the connected source?

Use the Comp1 Input or Comp2/YCbCr Input command in the Setting menu to select the signal format that matches the connected source.

For Comp1: Digital-RGB,Analog-RGB,RGB-Video

For Comp2: Analog-RGB,RGB-Video,YCbCr,YPbPr (P.70)

86