Epson ELP-810UG, ELP-811, ELP-600, ELP-800UG, ELP-820, EMP-810UG, EMP-811 manual Adjusting the tracking

Tip :

•The [Auto] button on the projector's control panel does not work while a menu or help screen is being displayed. To use the [Auto] button on the projector's control panel, you need to first exit the menu or help screen. Alternatively, you can use the [Auto] button on the remote control instead.

•If you use the remote control to activate the automatic adjustment function while the E- Zoom, A/V Mute or Picture in Picture functions are in use, the functions being used will be canceled before automatic adjustment is carried out. If the [Auto] button on the projector’s control panel is pressed, automatic adjustment will not be carried out if the E-Zoom or Picture in Picture function is being used.

•Automatic adjustment may not work properly with some types of signals which are output by computers. In such cases, you may need to adjust the tracking and synchronization manually.

Adjusting the tracking

If vertical stripes appear in the projected images, and this cannot be fixed using automatic adjustment. You will need to adjust the tracking manually using the following procedure.

Procedure

While holding down the [Shift] button on the projector's control panel, press the [Tracking +] button.

The tracking value will increase by one setting each time the [Tracking +] button is pressed.

[While holding down the [Shift] button on the projector's control panel, press the [Tracking -] button.

The tracking value will decrease by one setting each time the [Tracking -] button is pressed.

Tip :

The image will flash when continuous tracking adjustment is carried out, but this is normal.

Sync+

Tracking - Auto Tracking +

ShiftKeystone

Sync-

Projector

Sync+

Tracking - Auto Tracking +

ShiftKeystone

Sync-

Projector

47