Epson ELP-811, ELP-600, ELP-820 Effect 1 button Main screen audio Effect 2 button Sub-screen audio

The size of the sub-screen can be changed to one of five different sizes. The following values are the ratios for the vertical and horizontal lengths of the sub-screens to those of the main screen when the lengths of the main screen sides are 1.

Size 1	Size 2	Size 3	Size 4	Size 5
Approx. 1/3.2	Approx. 1/2.8	Approx. 1/2.5	Approx. 1/2.3	Approx. 1/2.1

When the [P in P] button is pressed, the initial sub-screen appears in size 2.

4 Press the button on the remote control to accept the display position and size for the sub-screen.

If you press the [P in P] button once more, the sub-screen will disappear.

Tip :

•If you change the position of the sub-screen, the sub-screen will appear in the last position which was set next time the P in P function is used.

•The E-Zoom function can be used at the same time that the P in P function is being used.

•If the audio input connector for the main screen and the sub-screen have already been set using the Audio Input command in the Audio menu, you can use the Effect buttons to switch between the sound for the two screens.

Effect [1] button: Main screen audio

Effect [2] button: Sub-screen audio

•If the P in P function is used while the keystone correction amount is near the limit value, the keystone correction amount may change.

61