7

Back of TV

AUDIO IN connectors

S-VIDEO IN connector

S-Video cable (not provided)

Aerial connector

Audio cable

(not provided)

Mains outlet

Mains Power Cord

ANT. IN

AV1 OUT

AV1 IN/OUT

 

S OUT

L

COMP. Y/C

 

AUDIO

 

 

OUT

 

 

R

AV2 IN/DECODER

PAUSE

RF OUT

Back of Recorder

RF Cable (provided)

S-VIDEO CONNECTION

To connect to a TV with S-VIDEO/AUDIO IN connectors . . .

1– Connect the aerial, recorder and TV as per "RF CONNEC- TION" (pg. 6).

2– Connect the recorder's S OUT connector to the TV's S- VIDEO IN connector.

3– Connect the recorder's AUDIO OUT connectors to the TV's AUDIO IN connectors.

NOTES:

You can obtain high-quality S-VHS pictures.

If your television is not stereo-capable, use the recorder's AUDIO OUT connectors to connect to an audio amplifier for Hi-Fi stereo sound reproduction. (pg. 43)

To operate the recorder with your TV using the S-VIDEO connection, set your TV to the VIDEO (or AV mode).

For switching the TV's mode, refer to the instruction manual of your television.

ATTENTION

Do NOT Plug the mains power cord into a mains outlet until all connections are completed.

Do NOT press the button on the recorder or on the remote control to turn on the recorder's power before you start the Auto Set Up procedure described on page 8.

AFTER YOU FINISH THIS STEP

Go to Step 3 – AUTO SET UP

Page 7
Image 7
JVC HR-S7600EK setup guide Back of TV Audio in connectors, Mains outlet Mains Power Cord