JVC HR-S7600EK Automatic Satellite Programme Recording, Satellite Receiver Unit, Aerial

28ADVANCEDOPERATIONS(cont.)

Automatic Satellite Programme Recording

This facility allows you to record automatically a satellite programme which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the recorder's AV2 IN/DECODER connector and programme the timer on the satellite receiver; the recorder starts recording when the signals input from the satellite receiver to the AV2 IN/DECODER connector, and when there is no input signals the recorder stops recording and the power shuts off.

Outdoor Unit

Satellite Cable

Satellite Receiver Unit

DECODER VCR TV

Mains outlet

S-VIDEO OUT

21-pin AV input connector (SCART)

Aerial	Back of TV
	S-VIDEO IN
	connector
TV Aerial cable	Aerial
	connector

AUDIO IN connectors

ANT. IN

RF OUT

AV1 OUT

S OUT

COMP. Y/C

AV1 IN/OUT	L
	AUDIO
	OUT
	R
AV2 IN/DECODER

ANT. IN

PAUSE

RF OUT

Back of Recorder

AV1 OUT switch

IMPORTANT

When you set "AV2 SELECT" to "SAT" (☞ pg. 37), it is possible to view a satellite broadcast with the TV set to its AV mode even if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR indicator on the display panel.

●In this case, be sure to set the AV1 OUT switch on the rear panel to COMP.

NOTE:

Refer to the instructions supplied with your satellite receiver.