JVC HR-S7600EK setup guide Edit To Or From Another Video Recorder

Edit To Or

From Another

Video

Recorder

35

You can use your video recorder as the source player or as the recording deck.

MAKE CONNECTIONS

1 Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated on page 36.

AWhen Using Your Video Recorder As The Source Player ...

... connect its AV1 IN/OUT connector to the recording deck.

BWhen Using Your Video Recorder As The Recording Deck ...

... connect its AV2 IN/DECODER or AV1 IN/OUT connector to the source player.

CIf Another Recorder Is Compatible With The Y/C Signal ...

... connect your recorder's AV1 IN/OUT connector to another recorder.

1– –:– –

2
1	2	3
4	5	6
7	8	9
NUMBER "0"	0
1
2

3

4

4

3

TV PROG

	With C connection ...
	● When using your recorder as the recording deck, set
	"AV1 SELECT" to "S-VIDEO" and "AV2 SELECT" to
	"AV2" (☞ pg. 37).
	● When using your recorder as the source player, set
	the AV1 OUT switch on the rear panel to Y/C
	(☞ pg. 6).
	SET RECORDING DECK’S
2	INPUT MODE
	Set to AUX. With this video recorder, press NUMBER
	key "0" and/or TV PROG to select “L-1” for the AV1 IN/
	OUT connector, or “L-2” for the AV2 IN/DECODER
	connector, depending on the connector being used.
	● When using the AV2 IN/DECODER connector, set
	"AV2 SELECT" to the appropriate mode. (☞ pg. 37)
	SET EDIT MODE
3 See "Picture Control" on page 33.

￿

4	START SOURCE PLAYER
	Engage its Play mode.
5	START RECORDING DECK
	Engage its Record mode.