Operation

Blodgett IQ2T Control

Programming the shelf sensitivity

The controller allows the user to program a sensi- tivity value (0---9) for each shelf position. The sen- sitivity value will shorten or stretch cook time de- pending upon shelf position.

NOTE: SEN1 is the top shelf position, SEN5 is the bottom shelf position.

1.The display reads SEN1.

2.Press the TOGGLE/CLEAR KEY (11) to clear the current value to the desired value. Use the product key numbers to input a new sensitivity value.

3.Press the SCAN KEY (15) to advance to the next shelf position, SEN2.

4.Repeat steps 2---3 for all five shelf positions.

Exiting the programming mode

1.The top display reads SYS. Press the PROG KEY (10). The control returns to the operating mode.

ERROR CODES AND ALARMS

NOTE: The error codes will appear in the top dis- play. All error codes are accompanied by an audible alarm.

Hi

Oven temperature is more than

 

40_F above the highest setpoint.

Prob

Probe failure.

HEAT ERR

From a cool start (below 140_F), the

 

oven takes more than 10 minutes to

 

climb from 150-300_F. Press the

 

TOGGLE/CLEAR KEY (11) to clear

 

the prompt. This code indicates a

 

problem with the system. Contact a

 

service technician.

FAN ERR

Indicates a fan failure during a call

 

for heat. Press the TOGGLE/CLEAR

 

KEY (11) to clear the alarm. The FAN

 

ERR display remains active. Press

 

the TOGGLE/CLEAR KEY (11) again

 

to clear the message and return the

 

system to normal operation. If con-

 

dition persists turn off the oven and

 

contact a service technician.

FANC ERR

Indicates a contact failure has oc-

 

curred in the fan control circuit.

 

Press the TOGGLE/CLEAR KEY (11)

 

to clear the alarm. The FANC ERR

 

display remains active. Press the

 

TOGGLE/CLEAR KEY (11) again to

 

clear the message and return the

 

system to normal operation. If con-

 

dition persists turn off the oven and

 

contact a service technician.

DOOR OPEN The controller senses the door is open. Close the door. If the door is closed contact a service technician.

29

Page 33
Image 33
Blodgett CTB Series, CTBR Series manual Programming the shelf sensitivity, Error Codes and Alarms

CTBR Series, CTB Series specifications

The Blodgett CTB Series and CTBR Series represent a pinnacle of innovation in commercial cooking equipment, designed specifically for the foodservice industry. With a focus on durability, efficiency, and versatility, these series cater to a variety of culinary needs, making them ideal for restaurants, bakeries, and other food establishments.

One of the standout features of the CTB Series is its advanced steam technology. This series employs a combination of convection and steam cooking, which helps retain moisture in food, ensuring that dishes are cooked evenly while locking in flavor. The ability to generate steam on-demand not only enhances cooking quality but also speeds up the cooking process, allowing for increased productivity in a busy kitchen environment.

The CTBR Series, on the other hand, takes it a step further with its revolutionary features designed for even more efficiency. Equipped with a patented ‘Combi-Cook’ technology, these ovens allow chefs to easily switch between convection, steam, and combination modes. This unparalleled flexibility enables a wide range of culinary techniques, from baking and roasting to steaming and even broiling, all in one compact unit.

Both series come with user-friendly digital controls that simplify operation, offering programmable cooking cycles. This feature is especially beneficial in establishing consistency in food preparation, a critical factor in high-volume foodservice operations. Additionally, the precise temperature control ensures that chefs can achieve the optimal cooking conditions for a variety of dishes.

Durability is another key characteristic of Blodgett ovens. Constructed from high-quality stainless steel, these ovens are built to withstand the rigors of a busy kitchen, reducing the need for frequent maintenance and repairs. The insulated design minimizes heat loss, resulting in energy savings and a more comfortable working environment for kitchen staff.

Moreover, Blodgett's commitment to innovation is evident in their focus on sustainability. The CTB and CTBR series utilize energy-efficient technology that aligns with modern demands for environmentally friendly cooking solutions. This efficiency does not come at the expense of performance, as users can still achieve exceptional cooking results while minimizing their carbon footprint.

In summary, the Blodgett CTB and CTBR Series stand as impressive options for any commercial kitchen that seeks reliability, versatility, and efficiency. With advanced steam technology, user-friendly controls, durable construction, and a commitment to sustainability, these ovens are not only a smart investment but also a valuable asset for any culinary professional looking to elevate their offerings.