CISCO CONFIDENTIAL
8
Cisco BTS 10200 Softswitch Release Notes for Release 3.5 V02
OL-3965-01
Caveats
Caveats
Caveats describe unexpected behavior in the Cisco BTS 10200 Softswitch software release 3.5.
This section describes two types of caveats:
•Open Caveats for Release 3.5, page 8
•Resolved Caveats in Release 3.5 Version 02, page12

Open Caveats for Release 3.5

The open issues existing in Cisco BTS 10200 Softswitch software release 3.5 are described in Table2.
The DDTS ID numbers listed in Table2 are Cisco internal tracking numbers.
Table2 Open Caveats
DDTS ID Description Workaround
CSCdz67908 Policy-prefix routing is not working. Symptom: Using an 800 number carrier to route an
operator call (00) does not work.
Workaround: Provision the 800 number carrier in
policy-nxx table along with the translated number.
CSCdz73097 ISDN not coming in service after oos/ins. Symptom: The Cisco BTS 10200 Softswitch ISDN trunk
group does not come in service all the time after the
following commands are sent (the ISDN trunk group
remains in the out of service state):
control trunk-grp id=129; mode=forced; target-state=oos;
control trunk-grp id=129; mode=forced; target-state=ins;
Workaround:To avoid this problem, do not execute these
two commands in an immediate sequence:
control trunk-grp tgn-id=129; mode=forced;
target-state=oos;
control trunk-grp tgn-id=129; mode=forced;
target-state=ins;
Wait at least one second before issuing the second
command.
CSCdz73634 Platform stays in INIT state when RDM
process is disabled in platform.cfg. Symptom: Platform stays in “INIT” state and neverexited
when RDM and other processes are disabled in
platform.cfg file.
Workaround:Re-enable the RDM process in platform.cfg
and restart the platform.
Note Without the RDM process, no replication is
possible. There is no reason to ever disable
RDM in platform.cfg. RDM is an integral part
of the platform software.