Chapter4 Deploying the C65/76M
Deployment and Commissioning Process
4-24
Cisco 6500/7600 Manager UserGuide
OL-2209-01
PredeploymentThis deployment option is used to deploy the Catalyst 6000 family switch or
Cisco 7600 series Internet Router into CEMF before it has been attached to the
network. After an object has been predeployed, CEMF keeps the object in a
decommissioned state until the device corresponding to the object is added to the
network. After the switch is brought on-line, the predeployed object will be
commissioned automatically. The following objects can be predeployed:
•Network Element, Software and Chassis
•Supervisor Modules
•Ethernet Modules
•Switch Fabric Modules
•FlexWAN Modules
•Port Adapter
•Content Switching Module
•EtherChannel Modules
The remaining C65/76M objects are automatically discovered when the Network
Element object is commissioned.
Network Element, Software, and Chassis Object Predeployment
To manually predeploy the Network Element, Software, and Chassis C65/76M
objects, select the pop-up menu item, Deployment > Deploy Manager, from the
appropriate container. The following example describes how to manually
predeploya Catalyst 6500 series switch. To manually predeploy other devices, use
the pop-up menu from the other manager containers.
Choose Deployment > Deploy Catalyst 6500 Manager from the pop-up menu.
This pop-up menu item, shown in Figure 4-17, is availablefrom the Site level in
thePhysical container and at the top level of the Catalyst 6500 Manager container.