4-75
Cisco 6500/7600 Manager UserGuide
OL-2209-01
Chapter4 Deploying the C65/76M Deployment and Commissioning Process
Commissioning Predeployed Objects
A predeployed NetworkElement and subobjects are commissioned automatically
whena coldStart SNMP trap that is issued from the switch or the router is received
by the CEMF server.
Note For the automatic commissioning to work, the switch or router must be
configuredto send SNMP traps and the CEMF server host must be in the trap
client list.
The subchassis discovery task is executed during commissioning. The discovery
task does the following:
•Verifies the predeployed objects.
•If a mismatch between the predeployed object and the discovered object
exists, then the predeployed object is placed in a Mismatched state. For
example, if a Supervisor Engine 2 MSFC2 is predeployed but a Supervisor
Engine 1A MSFC2 is discovered, the Supervisor Module object will be
placed in a Mismatched state. If the wrong object waspredeployed, delete the
object and recommission the Network Element. If the wrong module was
inserted in the switch or router, insert the correct module and recommission
the object.
•Checks for switch or router components that were not predeployed. Any
objects that are discovered will be created and commissioned automatically.
•Automatically creates and commissions the remaining C65/76M objects.
These objects include the power supply and all of the logical objects.
If the coldStart trap is not received by the CEMF server when the switch is first
brought on-line, then the predeployed Network Element object needs to be
commissioned manually by opening the Network Element dialog box and
selecting the Commission button (see Figure 4-15).