Cisco Systems CATALYST 2950 manual Verify that the LEDs on both Ethernet ports are green

Step 7 Connect a straight-through Category 5 Ethernet cable (not provided) to any 10/100 or 10/100/1000 Ethernet port on the switch front panel and to the Ethernet port on the PC.

DHCP-enabled PC

Step 8 Verify that the LEDs on both Ethernet ports are green.

Step 9 Wait 30 seconds.

Step 10 Launch a web browser on your PC. Enter the IP address 10.0.0.1 in the web browser, and press Enter.

Step 11 The Express Setup page appears. If it does not appear, see the “In Case of Difficulty” section on page 19 for help.

5