22
Cisco Connected Grid Modules for CGR1000 Series—WiMAX Installation and Configuration Guide
OL-26236-03
Configuring the Module
fan Show fan module sprom contents
mgmt-module Show mgmt module (MDS9216/MDS9216i/MDS9222i only) sprom contents
module Show linecard module sprom contents
powersupply Show powersupply sprom contents
stby-sup Show stanby supervisor sprom contents
sup Show supervisor sprom contents
xbar Show xbar fabric sprom contents
show interfaces wimax interface_name association

The following is an example of the show interfaces wimax interface_name association command:

Router # show interface wimax 3/1 association
Interface : Wimax3/1
MAC address : 00a0.0ad2.072f
Internet Address : 192.10.0.200/24
Device name : Sequans SQN12X0
Key management : None
Authen method : Open
Physical layer state : Connected
Link modulation : OFDMA
BSID : 00:02:AA:00:00:01
NAP : 00:02:AA
Frequency : 2310000 kHz
Channel bandwidth : 10000 kHz
TX power : 6 dBm
RSSI : -82 dBm
CINR : 20 dB
Uptime : 17344 s
Bytes in : 790189879
Packets in : 722443
Bytes out : 790721010
Packets out : 621521
show controllers wimax interface_name

The following is an example of the show controllers wimax interface_name command:

Router # show controllers wimax 6/1
Interface : wimax6/1
Hardware address : 0016.0800.118c
Service daemon version : 4.6.2.4-27804
Kernel driver version : 4.6.2.4-004
Firmware version : 4.6.2.4-28584
Microcode version : 6.7.2.2-8517
Hardware version : 10.7.0.0-8517
Board version : SQN12X0
Chip version : SQN12X0
RF Chip version : SQN12X0
Minimum frequency : 2500000
Maximum Frequency : 2700000
current frequency : 2550000
Bandwidth : 10MHz
Frame duration : 5000
Attached scan list : "aaa"
Min RSSI -72 dBm
Min CINR 28 dB
Min Duration 100 msec
Min Scan Interval 100 msec
Max Scan Interval 200 msec
Retries 5 ?