![](/images/new-backgrounds/1267085/26708545x1.webp)
Troubleshooting and Diagnostics
Initial | RNG | Backoff | Start | : | 0 | |||
Initial | RNG | Backoff | End | : | 5 | |||
Periodic | RNG | Backoof | Start | : | 0 | |||
Periodic | RNG | Backoff | End | : | 3 |
Bandwidth Request Backoof | Start | : | 0 | ||
Bandwidth Request Backoff | End | : | 3 | ||
UL Permutation | : |
|
| 0 | |
UL | : | 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff | |||
: |
|
| 4 | ||
: |
|
| 4 | ||
BWR | code qty | : |
|
| 4 |
DLC | CONFIG: |
|
|
|
|
bsEirp (dBm) | : |
|
| 4.0 | |
maxRssInitRanging (dBm) |
| : |
| 0.0 | |
PHY: |
|
|
|
|
|
BSiD |
|
|
| :0000.000.0000 | |
Qos | Classifiers | : | 6 |
|
|
Qos | Connections | : | 6 |
|
|
show interfaces wimax interface_name statistics
The following is an example of the show interfaces wimax interface_name statistics command:
Router # show interfaces wimax 2/1 statistics |
|
|
| |||
WiMAX Statistics (Cumulative Total/Last | 5 Seconds): |
|
| |||
RECEIVER |
|
| TRANSMITTER |
|
| |
Host Rx K Bytes: | 923438 | / 24366 | Host Tx K Bytes: | 115 | / 0 | |
Unicasts Rx: | 0 | / 0 | Unicasts | Tx: | 0 | / 0 |
Unicasts to host: | 0 | / 0 | Unicasts | by host: | 0 | / 0 |
Broadcasts Rx: | 29482 | / 734 | Broadcasts Tx: | 0 | / 0 | |
TBD. Add stats provided by | proximetry |
|
|
|
|
show interface wimax interface_name scanning
The following is an example of the show interfaces wimax interface_name scanning command:
Router # show interface wimax 3/1 scanning
Scan results for interface: Wimax3/1
BSID: 00:02:AA:00:00:01
Frequency: 2310000
NAPID: 00:02:AA
RSSI:
CINR: 20 dB
Troubleshooting and Diagnostics
This section provides the necessary background information and resources available for troubleshooting the 2G/3G Connected Grid module.
•WiMAX Debug Commands, page 24
•Checking Signal Strength, page 24
•Retrieving the Electronic Serial Number, page 24
•Converting Hexadecimal ESN to Decimal Notation, page 25
Cisco Connected Grid Modules for CGR 1000
| 23 |
| |
|
|