4
Cisco7206 VXR Router with ISA Security Policy
The 7206 VXR NPE-400 Router
The NPE-400 has three levels of cache: a primary and a secondary cache that are internal to the
microprocessor, and a tertiary 4-MB external cache that provides additional high-speed storage for data
and instructions.
Cisco 7206 VXR routers come equipped with one 280W AC-input power supply. (A 280W DC-input
power supply option is available.) A power supply filler plate is installed over the second power supply
bay. A fully configured Cisco 7206VXR router operates with only one installed power supply; however,
a second, optional power supply of the same type provides hot-swappable, load-sharing, redundant
power.
Module Interfaces

Input/Output Controller

The interfaces for the router are located on the front panel Input/Output (I/O) Controller, with the
exception of the power switch and power plug. The module has two Fast Ethernet (10/100 RJ-45)
connectors for data transfers in and out. The module also has two other RJ-45 connectors for a console
terminal for local system access and an auxiliary port for remote system access or dial backup using a
modem.
Figure 2 shows the front panel LEDs, which provide overall status of the router operation. The front
panel displays whether or not the router is booted, if the redundant power is attached and operational,
and overall activity/link status.
Figure 2 I/O Controller
Tabl e 1 provides detailed information conveyed by the LEDs on the front panel of the I/O Controller.
DUAL FAST ETHERNET INPUT/OUTPUT CONTROLLER
CONSOLE
AUX
100 Mbps
LINK
100 Mbps
LINK
SLOT 0
EJECT
PCMCIA
SLOT 1
ENABLED
CPU
RESET
IO PWR
OK
33444
CPU
RESET
IO PWR
OK
100 Mbps
LINK
SLOT 0
SLOT 1
C7200-I/O-2FE/E
ENABLED
FE/E 0
FE/E 1