Cisco Systems Cisco 7206 VXR manual Enabled

The 7206 VXR NPE-400 Router

Figure 3 LEDs for ISA Crypto Card

	ENCRYPT/COMP
ENABLE	SA-ISA
BOOT ERROR
	17607

Refer to Table 2 for further description of the ISA LEDs

Table 2	ISA LEDs and Descriptions
LED		Indication	Description
ENABLED		Green	Indicates the ISA is powered up. After system initialization,
			the enabled LED goes on to indicate that power is received
			and that the ISA is enabled for operation. All the following
			conditions must be met before the enabled LED goes on:
			• The ISA is correctly connected to the backplane and
			receiving power.
			• The system bus recognizes the ISA.
			If either of these conditions is not met, or if the router
			initialization fails, the enabled LED does not go on.
BOOT		Amber	Indicates the ISA is booting. This amber LED remains on
			while the ISA is in the boot process or when a packet is being
			encrypted or decrypted.
		Pulse Amber	Indicates the ISA is operating. After successfully booting, the
			boot LED pulses in a "heartbeat" pattern to indicate that the
			ISA is operating. As crypto traffic increases, the nominal
			level of this LED increases in proportion to the traffic level.
ERROR		Amber	Indicates an error has occurred. This amber LED goes on to
			indicate that an error was found in either the encryption
			function or the compression function. It is normally off.

All of these physical interfaces are separated into the logical interfaces from FIPS as described in Table 3.

Cisco 7206 VXR Router with ISA Security Policy

6