Cisco CompactFlash Adapter for Bootflash
Upgrade Installation Note
Product Numbers: WS-CF-UPG=, CF-ADAPTER=
This publication describes how to replace the switch processor (SP) bootflash memory module (DIMM) with CompactFlash on the Supervisor Engine 720.
Contents
This publication consists of these sections:
•Safety Overview, page 2
•Installing the SP Bootflash Memory Upgrade Kit, page 8
•Safety Warning Translations, page 27
•Obtaining Documentation, page 33
•Documentation Feedback, page 34
•Cisco Product Security Overview, page 34
•Product Alerts and Field Notices, page 35
•Obtaining Technical Assistance, page 36
•Obtaining Additional Publications and Information, page 38
Note For translations of the warnings in this publication, see the “Safety Warning Translations” section on page 27.
The CompactFlash adapter (see Figure 1) is a device that plugs into the SP bootflash DIMM socket on the Supervisor Engine 720. This device expands the amount of bootflash memory that is available. The kits contain a CompactFlash adapter with the CompactFlash installed. The CompactFlash adapter contains a Cisco IOS image (12.2(18)SXE5 or greater). See your Cisco IOS release notes for the exact release information.
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA
©
