Cisco TelePresence PrecisionHD Camera

 

 

 

 

 

PrecisionHD Camera User guide

Contents

 

Introduction

 

The physical interface

 

Connecting the camera

 

Video output formats

 

Daisy chaning

 

Appendices

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Codec C60 configurations

HDMI 1

Camera

 

control

Connecting to a PrecisionHD Camera

Connect the HDMI cable:

•From the HD VIDEO OUT (HDMI) connector on the camera.

•To the HDMI 1 IN (HDMI) connector on the Codec C60.

Connect the camera control cable:

•From the CODEC CONTROL IN (RJ45) connector on the camera.

•To the CAMERA CONTROL (RS–232) connector on the Codec C60. Visca™ protocol is supported.

Codec C90 configurations

HD-SDI

HDMI 1

Camera

 

 

control

Connecting to a PrecisionHD Camera

Basic setup

Connect the HDMI cable:

•From the HD VIDEO OUT (HDMI) connector on the camera.

•To the HDMI 1 (HDMI ) connector on the Codec C90.

Connect the camera control cable:

•From the CODEC CONTROL IN (RJ45) connector on the camera.

•To the CAMERA CONTROL (RS–232) connector on the Codec C90. Visca™ protocol is supported.

Other configurations

The HDMI <1..4> and HD-SDI <1..4> connectors can be used for the camera. The HDMI and HD-SDI can be used simultanously.

Connect the HD-SDI cable:

•From the HD-VIDEO OUT (HD-SDI) connector on the camera.

•To the HD-SDI<1..4> connector on the Codec C90.

Codec connectors

1 Output connector

1 Input connector

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

12

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.