Cisco TelePresence PrecisionHD Camera |
|
|
|
|
| PrecisionHD Camera User guide | ||||||
Contents |
| Introduction |
| The physical interface |
| Connecting the camera |
| Video output formats |
| Daisy chaning |
| Appendices |
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
The PrecisionHD Camera 720p
The orange LED illuminates while in a call and flickers when there is an incoming call.
The lens hood (not mounted on the camera in the picture) is detachable.
We recommend that you mount it to prevent stray light from disturbing your video experience.
Snap it on gently.
VISCA | Power in | HDMI | Camera | Kensington |
Daisy | 12 V DC | video | control & | lock |
chain |
| out | Power |
|
The green LED is continuously illuminated when power is On, but it flickers when receiving signals from the remote control.
HDMI
•HDMI is the main video source. The maximum resolution is 720p30.
Camera control
Camera control is used for controlling the pan, tilt and zoom, and for powering up the camera.
Power
•When the camera is used with a Cisco Codec, power will be supplied through Camera Control cable.
•When the camera is used with
Extra camera
If you want to connect cameras in a daisy chain*:
•The first camera in the chain is powered by the camera control cable. The next must use the 12V DC Power in.
•Use an extra camera cable between the Extra Camera sockets.
Kensington lock
The Kensington lock may be used to prevent the camera to be moved from its place or to prevent theft.
* Not supported with Codec C20
D14640.09 PrecisionHD | 9 | www.cisco.com |
© |
|