Cisco TelePresence PrecisionHD Camera | PrecisionHD Camera User guide |
Contents | Introduction | The physical interface | Connecting the camera | Video output formats | Daisy chaining |
|
|
|
|
|
|
Appendices
Daisy chaining of the PrecisionHD 720p
A single daisy chain can have:
•Three cameras when using Codec C60
•Seven cameras when using Codec C90.
Locate the Extra Camera and Power connectors.
•Power. The first camera in the chain is powered up from the codec by the VISCA camera control cable. Additional cameras must use the 12V DC Power in.
•Extra camera cable. The daisy chained cameras are connected by using the VISCA Extra Camera cable (maximum length 20 m / 65.6 ft) between the Extra Camera and Codec Control sockets
Example. PrecisionHD 720p cameras in a daisy chain.
| Power in | Power in | |
| 12V DC | 12V DC | |
Main | Second | Third | |
camera | |||
camera | camera | ||
|
HDMI out: | Connect to the | HDMI out: | HDMI out: | |
Connect to the | Camera Control | Connect to the | Connect to the | |
Video Input 1 | socket on the | |||
Video Input 2 | Video Input 3 | |||
on the codec | codec. | |||
on the codec | on the codec | |||
|
|
You can connect up to three cameras with Codec C60 and up to seven cameras with Codec C90
VISCA™ is a trademark of Sony Corporation
D14640.09 PrecisionHD | 21 | www.cisco.com |
© |
|