Cisco TelePresence PrecisionHD Camera

PrecisionHD Camera User guide

Contents

Introduction

The physical interface

Connecting the camera

Video output formats

Daisy chaining

 

 

 

 

 

 

Appendices

Daisy chaining of the PrecisionHD 1080p12x

A single daisy chain with PrecisionHD 1080p12x can have:

•Three cameras when using Codec C60.

•Seven cameras when using Codec C90.

Locate the Extra Camera and Power connectors.

•Power. The first camera in the chain is powered up from the codec by the VISCA camera control cable. Additional cameras must use the 12V DC Power in.

•Extra camera cable. The daisy chained cameras are connected by using the VISCA Extra Camera cable (maximum length 20 m / 65.6 ft) between the Extra Camera In and Codec Control In sockets.

•HDMI and HD-SDI. The HDMI and HD-SDI outputs can be used simultaneously on the same camera.

Example. PrecisionHD 1080p12x cameras in a daisy chain.

 

Power in

Power in

 

12V DC

12V DC

Main

Second

Third

camera

camera

camera

RJ11–RJ45

RJ11–RJ45

RJ11–RJ45

Connect to the

HDMI out:

HDMI out:

HDMI out:

Camera Control

Connect to the

Connect to the

Connect to the

socket on the

Video Input 1

Video Input 2

Video Input 3

codec.

on the codec

on the codec

on the codec

 

 

You can connect up to three cameras with Codec C60 and up to seven cameras with Codec C90

VISCA™ is a trademark of Sony Corporation

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

20

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.