Cisco TelePresence PrecisionHD Camera |
|
|
|
|
| PrecisionHD Camera User guide | ||||||
Contents |
| Introduction |
| The physical interface |
| Connecting the camera |
| Video output formats |
| Daisy chaning |
| Appendices |
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
The PrecisionHD Camera 1080p12x
The orange LED illuminates while in a call and flickers when there is an incoming call.
The lens hood is detachable.
We recommend that you mount it to prevent stray light from disturbing your video experience.
Snap it on gently.
Power Camera
Supply Control
Kensington lock
HDMI | Ethernet |
Video Out | RJ45 |
The green LED is continuously illuminated when power is On, but it flickers when receiving signals from the remote control.
When mounted (upside down) in the Profile 65” and the Profile 65” Dual, the LED is not visible.
Extra Camera Out and for daisy chaining*
HDMI and
•HDMI is the main video source. The maximum resolution is 1080p60.
•
•The HDMI and
Extra camera
For
•The first camera in the chain is powered by the camera control cable. The next must use the 12V DC Power in.
•Use an extra camera cable between the Extra Camera sockets.
Camera control
Camera control is used for controlling the pan, tilt and zoom, and for powering up the camera.
Power
•When the camera is used with a Cisco Codec, power will be supplied through Camera Control cable.
•When the camera is used with
Ethernet
For software upgrades on daisy chained cameras. Requires software version TC3.0 or higher on the Codec
Kensington lock
The Kensington lock may be used to prevent the camera to be moved from its place or to prevent theft.
* Not supported with Codec C20.
D14640.09 PrecisionHD | 6 | www.cisco.com |
© |
|