Cisco Systems MAS-7KLED manual LED Board Location and Description

Product Overview

LED Board Location and Description

The LED board contains the three LEDs that report system software (normal) and power supply (upper power and lower power) status through semiopaque panels on the front of the chassis. Figure 2 shows the three system status indicators.

Figure 2 System Status Indicators (Front-Panel LEDs)

UPPER	LOWER	NORMAL
POWER
	POWER

		Cisco 7000
UPPER	LOWER	NORMAL
POWER	POWER

H1407a

The LED board is mounted to the backplane on a horizontal plane near the top of the chassis interior (shown edge-on in Figure 4). The board slides into two brackets mounted to the front of the backplane, and a connector on the rear of the LED board mates with a connector on the backplane.

Figure 3 LED Board

LED board
spring	Backplane connector

LED board

LED board

brackets

Board locking

pin

LEDs

H1387a

Cisco 7000 and Cisco 7507 LED Board Replacement Instructions 3