Cisco Systems ME 3400 appendix

Appendix C Connecting to DC Power

Grounding the Switch

Step 4 Using a Panduit crimping tool, crimp the ground lug to the 6-gauge wire.

Figure C-2 Crimping the Ground Lug

60529

Step 5 Use the two number-10-32 screws to attach the ground lug and wire assembly to the rear panel of the switch.

Step 6 Using a ratcheting torque screwdriver, torque each ground-lug screw to 15 lbf-in. (240 ounce-force inches [ozf-in.]). Figure C-3shows how to torque the ground screws on a Cisco ME DC switch.

Figure C-3 Torquing Ground-Lug Screws

132854

1

1

Torque to 15 lbf-in.

Cisco ME 3400 Ethernet Access Switch Hardware Installation Guide

OL-7677-02 C-3