ELECTRICAL WIRING
5.Route wiring harnesses through large hole on side of unit. Mount bracket to side of unit with screw provided. See Figure 22.
6.Attach wiring harness to either TP/TH and TH on control valve or to existing wiring harness with two (2) 0.250" male spade terminals for remote or
7.Install knob to shaft of
8.Place thermo bulb in front of the firebox for incoming air.
Wiring Harnesses
Screw
Knob
THERMOSTTTI | ||
|
| NGAT |
|
| HI |
|
| GH |
2 |
|
|
6D | 3317 | L |
| ||
|
| |
|
| O |
|
| W |
T-Stat
Sensor and
Bracket
Thermo Bulb
Figure 22 - Installing T-Stat Sensor to DEB Base
with Screw Provided
TH
TP/TH
Wiring Harnesses
Figure 23 - Attaching Wiring Harnesses to Control Valve
24 | 44D0060 |